GasFlowMeter/Libraries/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_cryp_ex.c

/**
  ******************************************************************************
  * @file    stm32h7xx_hal_cryp_ex.c
  * @author  MCD Application Team
  * @version V1.2.0
  * @date   29-December-2017
  * @brief   Extended CRYP HAL module driver
  *          This file provides firmware functions to manage the following 
  *          functionalities of CRYP extension peripheral:
  *           + Extended AES processing functions     
  *  
  @verbatim
  ==============================================================================
                     ##### How to use this driver #####
  ==============================================================================
    [..]
    The CRYP extension HAL driver can be used after AES-GCM or AES-CCM  
    Encryption/Decryption to get the authentication messages.

  @endverbatim
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
  *
  * Redistribution and use in source and binary forms, with or without modification,
  * are permitted provided that the following conditions are met:
  *   1. Redistributions of source code must retain the above copyright notice,
  *      this list of conditions and the following disclaimer.
  *   2. Redistributions in binary form must reproduce the above copyright notice,
  *      this list of conditions and the following disclaimer in the documentation
  *      and/or other materials provided with the distribution.
  *   3. Neither the name of STMicroelectronics nor the names of its contributors
  *      may be used to endorse or promote products derived from this software
  *      without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  ******************************************************************************
  */ 

/* Includes ------------------------------------------------------------------*/
#include "stm32h7xx_hal.h"

/** @addtogroup STM32H7xx_HAL_Driver
  * @{
  */
#if defined (CRYP)
/** @defgroup CRYPEx CRYPEx
  * @brief CRYP Extension HAL module driver.
  * @{
  */

#ifdef HAL_CRYP_MODULE_ENABLED

/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/** @addtogroup CRYPEx_Private_Defines
  * @{
  */

#define CRYP_PHASE_INIT                 0x00000000U
#define CRYP_PHASE_HEADER               CRYP_CR_GCM_CCMPH_0
#define CRYP_PHASE_PAYLOAD              CRYP_CR_GCM_CCMPH_1
#define CRYP_PHASE_FINAL                CRYP_CR_GCM_CCMPH

#define CRYP_OPERATINGMODE_ENCRYPT      0x00000000U
#define CRYP_OPERATINGMODE_DECRYPT      CRYP_CR_ALGODIR

#define  CRYPEx_PHASE_PROCESS       0x02U     /*!< CRYP peripheral is in processing phase */
#define  CRYPEx_PHASE_FINAL         0x03U     /*!< CRYP peripheral is in final phase this is relevant only with CCM and GCM modes */   

 /*  CTR0 information to use in CCM algorithm */
#define CRYP_CCM_CTR0_0            0x07FFFFFFU         
#define CRYP_CCM_CTR0_3            0xFFFFFF00U         


/**
  * @}
  */

/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/



/* Exported functions---------------------------------------------------------*/
/** @addtogroup CRYPEx_Exported_Functions
  * @{
  */

/** @defgroup CRYPEx_Exported_Functions_Group1 Extended AES processing functions 
 *  @brief    CRYPEx Extended processing functions. 
 *
@verbatim   
  ==============================================================================
              ##### Extended AES processing functions #####
  ==============================================================================  
    [..]  This section provides functions allowing to generate the authentication 
          TAG in Polling mode 
      (+)HAL_CRYPEx_AESGCM_GenerateAuthTAG
      (+)HAL_CRYPEx_AESCCM_GenerateAuthTAG
         they should be used after Encrypt/Decrypt operation.

@endverbatim
  * @{
  */


/**
  * @brief  generate the GCM authentication TAG.
  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
  *         the configuration information for CRYP module
  * @param  AuthTag: Pointer to the authentication buffer
  * @param  Timeout: Timeout duration
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_CRYPEx_AESGCM_GenerateAuthTAG(CRYP_HandleTypeDef *hcryp, uint32_t *AuthTag, uint32_t Timeout)
{
  uint32_t tickstart = 0U;    
  uint64_t headerlength = hcryp->Init.HeaderSize * 32U; /* Header length in bits */
  uint64_t inputlength = (hcryp->Size) * 32U; /* input length in bits */
  uint32_t tagaddr = (uint32_t)AuthTag;  
  
  if(hcryp->State == HAL_CRYP_STATE_READY)
  {  
    /* Process locked */
    __HAL_LOCK(hcryp);
    
    /* Change the CRYP peripheral state */
    hcryp->State = HAL_CRYP_STATE_BUSY;
    
    /* Check if initialization phase has already been performed */
    if(hcryp->Phase == CRYPEx_PHASE_PROCESS)
    {
      /* Change the CRYP phase */
      hcryp->Phase = CRYPEx_PHASE_FINAL;
    }
    else /* Initialization phase has not been performed*/
    { 
      /* Disable the Peripheral */
      __HAL_CRYP_DISABLE(hcryp);
      
      /* Sequence error code field */ 
      hcryp->ErrorCode |= HAL_CRYP_ERROR_AUTH_TAG_SEQUENCE; 
      
      /* Change the CRYP peripheral state */
      hcryp->State = HAL_CRYP_STATE_READY;    
      
      /* Process unlocked */
      __HAL_UNLOCK(hcryp);
      return HAL_ERROR;
    }
    
    /* Disable CRYP to start the final phase */
    __HAL_CRYP_DISABLE(hcryp);
    
    /* Select final phase */  
    MODIFY_REG(hcryp->Instance->CR, CRYP_CR_GCM_CCMPH, CRYP_PHASE_FINAL);  
    
    /*ALGODIR bit must be set to <20>0<EFBFBD>.*/ 
    hcryp->Instance->CR &=  ~CRYP_CR_ALGODIR;
    
    /* Enable the CRYP peripheral */
    __HAL_CRYP_ENABLE(hcryp);
    
    /* Write the number of bits in header (64 bits) followed by the number of bits
    in the payload */
    if(hcryp->Init.DataType == CRYP_DATATYPE_1B)
    {
      hcryp->Instance->DIN = 0U;
      hcryp->Instance->DIN = __RBIT((uint32_t)(headerlength));
      hcryp->Instance->DIN = 0U;
      hcryp->Instance->DIN = __RBIT((uint32_t)(inputlength));
    }
    else if(hcryp->Init.DataType == CRYP_DATATYPE_8B)
    {
      hcryp->Instance->DIN = 0U;
      hcryp->Instance->DIN = __REV((uint32_t)(headerlength));
      hcryp->Instance->DIN = 0U;
      hcryp->Instance->DIN = __REV((uint32_t)(inputlength));    
    }
    else if(hcryp->Init.DataType == CRYP_DATATYPE_16B)
    {
      hcryp->Instance->DIN = 0U;
      hcryp->Instance->DIN = __ROR((uint32_t)headerlength, 16U);
      hcryp->Instance->DIN = 0U;
      hcryp->Instance->DIN = __ROR((uint32_t)inputlength, 16U);
    }
    else if(hcryp->Init.DataType == CRYP_DATATYPE_32B)
    {
      hcryp->Instance->DIN = 0U;
      hcryp->Instance->DIN = (uint32_t)(headerlength);
      hcryp->Instance->DIN = 0U;
      hcryp->Instance->DIN = (uint32_t)(inputlength);
    }  
    
    /* Wait for OFNE flag to be raised */
    tickstart = HAL_GetTick();
    while(HAL_IS_BIT_CLR(hcryp->Instance->SR, CRYP_FLAG_OFNE))
    {
      /* Check for the Timeout */
      if(Timeout != HAL_MAX_DELAY)
      {
        if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
        {       
          /* Disable the CRYP Peripheral Clock */
          __HAL_CRYP_DISABLE(hcryp);
          
          /* Change state */
          hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT;
          hcryp->State = HAL_CRYP_STATE_READY;  
          
          /* Process unlocked */          
          __HAL_UNLOCK(hcryp); 
          return HAL_ERROR;
        }
      }
    }          
    
    /* Read the authentication TAG in the output FIFO */
    *(uint32_t*)(tagaddr) = hcryp->Instance->DOUT;
    tagaddr+=4U;
    *(uint32_t*)(tagaddr) = hcryp->Instance->DOUT;
    tagaddr+=4U;
    *(uint32_t*)(tagaddr) = hcryp->Instance->DOUT;
    tagaddr+=4U;
    *(uint32_t*)(tagaddr) = hcryp->Instance->DOUT;      
    
    /* Disable the peripheral */
    __HAL_CRYP_DISABLE(hcryp);
    
    /* Change the CRYP peripheral state */
    hcryp->State = HAL_CRYP_STATE_READY;    
    
    /* Process unlocked */
    __HAL_UNLOCK(hcryp);
  }
  else
  {
    /* Busy error code field */
    hcryp->ErrorCode |= HAL_CRYP_ERROR_BUSY; 
    return HAL_ERROR;
  }   
  /* Return function status */
  return HAL_OK;
}

/**
  * @brief  AES CCM Authentication TAG generation.
  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
  *         the configuration information for CRYP module
  * @param  AuthTag: Pointer to the authentication buffer
  * @param  Timeout: Timeout duration
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_CRYPEx_AESCCM_GenerateAuthTAG(CRYP_HandleTypeDef *hcryp, uint32_t *AuthTag, uint32_t Timeout)
{
  uint32_t tagaddr = (uint32_t)AuthTag;
  uint32_t ctr0 [4]={0};
  uint32_t ctr0addr = (uint32_t)ctr0;
  uint32_t tickstart = 0U;  
  
  if(hcryp->State == HAL_CRYP_STATE_READY)
  {  
    /* Process locked */
    __HAL_LOCK(hcryp);
    
    /* Change the CRYP peripheral state */
    hcryp->State = HAL_CRYP_STATE_BUSY;
    
    /* Check if initialization phase has already been performed */
    if(hcryp->Phase == CRYPEx_PHASE_PROCESS)
    {
      /* Change the CRYP phase */
      hcryp->Phase = CRYPEx_PHASE_FINAL;
    }
    else /* Initialization phase has not been performed*/
    { 
      /* Disable the peripheral */
      __HAL_CRYP_DISABLE(hcryp);
            
      /* Sequence error code field */   
     hcryp->ErrorCode |= HAL_CRYP_ERROR_AUTH_TAG_SEQUENCE;      
      
     /* Change the CRYP peripheral state */
      hcryp->State = HAL_CRYP_STATE_READY;    
      
      /* Process unlocked */
      __HAL_UNLOCK(hcryp);
      return HAL_ERROR;
    } 
    
    /* Disable CRYP to start the final phase */
    __HAL_CRYP_DISABLE(hcryp);   
    
    /* Select final phase & ALGODIR bit must be set to <20>0<EFBFBD>. */
    MODIFY_REG(hcryp->Instance->CR, CRYP_CR_GCM_CCMPH|CRYP_CR_ALGODIR, CRYP_PHASE_FINAL|CRYP_OPERATINGMODE_ENCRYPT);     
    
    /* Enable the CRYP peripheral */
    __HAL_CRYP_ENABLE(hcryp);
    
    /* Write the counter block in the IN FIFO, CTR0 information from B0
    data has to be swapped according to the DATATYPE*/
    ctr0[0]=(hcryp->Init.B0[0]) & CRYP_CCM_CTR0_0;
    ctr0[1]=hcryp->Init.B0[1];
    ctr0[2]=hcryp->Init.B0[2];
    ctr0[3]=hcryp->Init.B0[3] &  CRYP_CCM_CTR0_3; 
    
    if(hcryp->Init.DataType == CRYP_DATATYPE_8B)
    {   
      hcryp->Instance->DIN = __REV(*(uint32_t*)(ctr0addr));
      ctr0addr+=4;
      hcryp->Instance->DIN = __REV(*(uint32_t*)(ctr0addr));
      ctr0addr+=4;
      hcryp->Instance->DIN = __REV(*(uint32_t*)(ctr0addr));
      ctr0addr+=4;
      hcryp->Instance->DIN = __REV(*(uint32_t*)(ctr0addr));
    }
    else if(hcryp->Init.DataType == CRYP_DATATYPE_16B)
    {
      hcryp->Instance->DIN = __ROR(*(uint32_t*)(ctr0addr), 16U);
      ctr0addr+=4;
      hcryp->Instance->DIN = __ROR(*(uint32_t*)(ctr0addr), 16U);
      ctr0addr+=4;
      hcryp->Instance->DIN = __ROR(*(uint32_t*)(ctr0addr), 16U);
      ctr0addr+=4;
      hcryp->Instance->DIN = __ROR(*(uint32_t*)(ctr0addr), 16U);
    }
    else if(hcryp->Init.DataType == CRYP_DATATYPE_1B)
    { 
      hcryp->Instance->DIN = __RBIT(*(uint32_t*)(ctr0addr));
      ctr0addr+=4;
      hcryp->Instance->DIN = __RBIT(*(uint32_t*)(ctr0addr));
      ctr0addr+=4;
      hcryp->Instance->DIN = __RBIT(*(uint32_t*)(ctr0addr));
      ctr0addr+=4;
      hcryp->Instance->DIN = __RBIT(*(uint32_t*)(ctr0addr)); 
    }
    else
    {
      hcryp->Instance->DIN = *(uint32_t*)(ctr0addr);
      ctr0addr+=4;
      hcryp->Instance->DIN = *(uint32_t*)(ctr0addr);
      ctr0addr+=4;
      hcryp->Instance->DIN = *(uint32_t*)(ctr0addr);
      ctr0addr+=4;
      hcryp->Instance->DIN = *(uint32_t*)(ctr0addr);;
    }   
    /* Wait for OFNE flag to be raised */
    tickstart = HAL_GetTick();
    while(HAL_IS_BIT_CLR(hcryp->Instance->SR, CRYP_FLAG_OFNE))
    {
      /* Check for the Timeout */
      if(Timeout != HAL_MAX_DELAY)
      {
        if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
        {       
          /* Disable the CRYP peripheral Clock */
          __HAL_CRYP_DISABLE(hcryp);
         
          /* Change state */
          hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT;
          hcryp->State = HAL_CRYP_STATE_READY;  
         
          /* Process unlocked */          
          __HAL_UNLOCK(hcryp); 
          return HAL_ERROR;
        }
      }
    }
    
    /* Read the Auth TAG in the IN FIFO */
    *(uint32_t*)(tagaddr) = hcryp->Instance->DOUT;
    tagaddr+=4U;
    *(uint32_t*)(tagaddr) = hcryp->Instance->DOUT;
    tagaddr+=4U;
    *(uint32_t*)(tagaddr) = hcryp->Instance->DOUT;
    tagaddr+=4U;
    *(uint32_t*)(tagaddr) = hcryp->Instance->DOUT;      
    
    /* Change the CRYP peripheral state */
    hcryp->State = HAL_CRYP_STATE_READY;
   
    /* Process unlocked */
    __HAL_UNLOCK(hcryp);
  
    /* Disable CRYP  */
    __HAL_CRYP_DISABLE(hcryp);  
  }
  else
  {
    /* Busy error code field */
    hcryp->ErrorCode = HAL_CRYP_ERROR_BUSY; 
    return HAL_ERROR;
  }   
  /* Return function status */
  return HAL_OK;   
}

/**
  * @}
  */


#endif /* HAL_CRYP_MODULE_ENABLED */

/**
  * @}
  */
#endif /*  CRYP*/
/**
  * @}
  */
  
/**
  * @}
  */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/