440 lines
17 KiB
C
440 lines
17 KiB
C
|
/**
|
||
|
|
******************************************************************************
|
||
|
|
* @file stm32h7xx_hal_opamp.h
|
||
|
|
* @author MCD Application Team
|
||
|
|
* @version V1.2.0
|
||
|
|
* @date 29-December-2017
|
||
|
|
* @brief Header file of OPAMP HAL module.
|
||
|
|
******************************************************************************
|
||
|
|
* @attention
|
||
|
|
*
|
||
|
|
* <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
|
||
|
|
*
|
||
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
||
|
|
* are permitted provided that the following conditions are met:
|
||
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
||
|
|
* this list of conditions and the following disclaimer.
|
||
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||
|
|
* this list of conditions and the following disclaimer in the documentation
|
||
|
|
* and/or other materials provided with the distribution.
|
||
|
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||
|
|
* may be used to endorse or promote products derived from this software
|
||
|
|
* without specific prior written permission.
|
||
|
|
*
|
||
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||
|
|
*
|
||
|
|
******************************************************************************
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
||
|
|
#ifndef __STM32H7xx_HAL_OPAMP_H
|
||
|
|
#define __STM32H7xx_HAL_OPAMP_H
|
||
|
|
|
||
|
|
#ifdef __cplusplus
|
||
|
|
extern "C" {
|
||
|
|
#endif
|
||
|
|
|
||
|
|
/* Includes ------------------------------------------------------------------*/
|
||
|
|
#include "stm32h7xx_hal_def.h"
|
||
|
|
|
||
|
|
/** @addtogroup STM32H7xx_HAL_Driver
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @addtogroup OPAMP
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* Exported types ------------------------------------------------------------*/
|
||
|
|
|
||
|
|
/** @defgroup OPAMP_Exported_Types OPAMP Exported Types
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief OPAMP Init structure definition
|
||
|
|
*/
|
||
|
|
|
||
|
|
typedef struct
|
||
|
|
{
|
||
|
|
|
||
|
|
uint32_t PowerMode; /*!< Specifies the power mode Normal or High Speed.
|
||
|
|
This parameter must be a value of @ref OPAMP_PowerMode */
|
||
|
|
|
||
|
|
uint32_t Mode; /*!< Specifies the OPAMP mode
|
||
|
|
This parameter must be a value of @ref OPAMP_Mode
|
||
|
|
mode is either Standalone, - Follower or PGA */
|
||
|
|
|
||
|
|
uint32_t InvertingInput; /*!< Specifies the inverting input in Standalone & PGA modes
|
||
|
|
- In Standalone mode i.e when mode is OPAMP_STANDALONE_MODE
|
||
|
|
This parameter must be a value of @ref OPAMP_InvertingInput
|
||
|
|
- In Follower mode i.e when mode is OPAMP_FOLLOWER_MODE
|
||
|
|
& In PGA mode i.e when mode is OPAMP_PGA_MODE
|
||
|
|
This parameter is Not Applicable */
|
||
|
|
|
||
|
|
uint32_t NonInvertingInput; /*!< Specifies the non inverting input of the opamp:
|
||
|
|
This parameter must be a value of @ref OPAMP_NonInvertingInput */
|
||
|
|
|
||
|
|
uint32_t PgaGain; /*!< Specifies the gain in PGA mode
|
||
|
|
i.e. when mode is OPAMP_PGA_MODE.
|
||
|
|
This parameter must be a value of @ref OPAMP_PgaGain */
|
||
|
|
|
||
|
|
uint32_t PgaConnect; /*!< Specifies the inverting pin in PGA mode
|
||
|
|
i.e. when mode is OPAMP_PGA_MODE
|
||
|
|
This parameter must be a value of @ref OPAMP_PgaConnect
|
||
|
|
Either: not connected, connected to VINM0, connected to VINM1
|
||
|
|
(VINM0 or VINM1 are typically used for external filtering) */
|
||
|
|
|
||
|
|
uint32_t UserTrimming; /*!< Specifies the trimming mode
|
||
|
|
This parameter must be a value of @ref OPAMP_UserTrimming
|
||
|
|
UserTrimming is either factory or user trimming.*/
|
||
|
|
|
||
|
|
uint32_t TrimmingValueP; /*!< Specifies the offset trimming value (PMOS) in Normal Mode
|
||
|
|
|
||
|
|
i.e. when UserTrimming is OPAMP_TRIMMING_USER.
|
||
|
|
This parameter must be a number between Min_Data = 0 and Max_Data = 31.
|
||
|
|
16 is typical default value */
|
||
|
|
|
||
|
|
uint32_t TrimmingValueN; /*!< Specifies the offset trimming value (NMOS) in Normal Mode
|
||
|
|
i.e. when UserTrimming is OPAMP_TRIMMING_USER.
|
||
|
|
This parameter must be a number between Min_Data = 0 and Max_Data = 31.
|
||
|
|
16 is typical default value */
|
||
|
|
|
||
|
|
uint32_t TrimmingValuePHighSpeed; /*!< Specifies the offset trimming value (PMOS) in High Speed Mode
|
||
|
|
i.e. when UserTrimming is OPAMP_TRIMMING_USER.
|
||
|
|
This parameter must be a number between Min_Data = 0 and Max_Data = 31.
|
||
|
|
16 is typical default value */
|
||
|
|
|
||
|
|
uint32_t TrimmingValueNHighSpeed; /*!< Specifies the offset trimming value (NMOS) in High Speed Mode
|
||
|
|
i.e. when UserTrimming is OPAMP_TRIMMING_USER.
|
||
|
|
This parameter must be a number between Min_Data = 0 and Max_Data = 31.
|
||
|
|
16 is typical default value */
|
||
|
|
|
||
|
|
}OPAMP_InitTypeDef;
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief HAL State structures definition
|
||
|
|
*/
|
||
|
|
|
||
|
|
typedef enum
|
||
|
|
{
|
||
|
|
HAL_OPAMP_STATE_RESET = 0x00000000, /*!< OPAMP is not yet Initialized */
|
||
|
|
|
||
|
|
HAL_OPAMP_STATE_READY = 0x00000001, /*!< OPAMP is initialized and ready for use */
|
||
|
|
HAL_OPAMP_STATE_CALIBBUSY = 0x00000002, /*!< OPAMP is enabled in auto calibration mode */
|
||
|
|
|
||
|
|
HAL_OPAMP_STATE_BUSY = 0x00000004, /*!< OPAMP is enabled and running in normal mode */
|
||
|
|
HAL_OPAMP_STATE_BUSYLOCKED = 0x00000005 /*!< OPAMP is locked
|
||
|
|
only system reset allows reconfiguring the opamp. */
|
||
|
|
|
||
|
|
}HAL_OPAMP_StateTypeDef;
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief OPAMP Handle Structure definition
|
||
|
|
*/
|
||
|
|
typedef struct
|
||
|
|
{
|
||
|
|
OPAMP_TypeDef *Instance; /*!< OPAMP instance's registers base address */
|
||
|
|
OPAMP_InitTypeDef Init; /*!< OPAMP required parameters */
|
||
|
|
HAL_StatusTypeDef Status; /*!< OPAMP peripheral status */
|
||
|
|
HAL_LockTypeDef Lock; /*!< Locking object */
|
||
|
|
__IO HAL_OPAMP_StateTypeDef State; /*!< OPAMP communication state */
|
||
|
|
|
||
|
|
} OPAMP_HandleTypeDef;
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief HAl_OPAMP_TrimmingValueTypeDef definition
|
||
|
|
*/
|
||
|
|
|
||
|
|
typedef uint32_t HAL_OPAMP_TrimmingValueTypeDef;
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* Exported constants --------------------------------------------------------*/
|
||
|
|
|
||
|
|
/** @defgroup OPAMP_Exported_Constants OPAMP Exported Constants
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup OPAMP_Mode OPAMP Mode
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#define OPAMP_STANDALONE_MODE ((uint32_t)0x00000000) /*!< standalone mode */
|
||
|
|
#define OPAMP_PGA_MODE OPAMP_CSR_VMSEL_1 /*!< PGA mode */
|
||
|
|
#define OPAMP_FOLLOWER_MODE (OPAMP_CSR_VMSEL_1 | OPAMP_CSR_VMSEL_0) /*!< follower mode */
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup OPAMP_NonInvertingInput OPAMP Non Inverting Input
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
#define OPAMP_NONINVERTINGINPUT_IO0 ((uint32_t)0x00000000) /*!< OPAMP non-inverting input connected to dedicated IO pin */
|
||
|
|
#define OPAMP_NONINVERTINGINPUT_DAC_CH OPAMP_CSR_VPSEL_0 /*!< OPAMP non-inverting input connected internally to DAC channel */
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup OPAMP_InvertingInput OPAMP Inverting Input
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
#define OPAMP_INVERTINGINPUT_IO0 ((uint32_t)0x00000000) /*!< OPAMP inverting input connected to dedicated IO pin */
|
||
|
|
#define OPAMP_INVERTINGINPUT_IO1 OPAMP_CSR_VMSEL_0 /*!< OPAMP inverting input connected to dedicated IO pin */
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup OPAMP_PgaConnect OPAMP Pga Connect
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
#define OPAMP_PGA_CONNECT_INVERTINGINPUT_NO ((uint32_t)0x00000000) /*!< In PGA mode, the inverting input is not connected */
|
||
|
|
#define OPAMP_PGA_CONNECT_INVERTINGINPUT_IO0 OPAMP_CSR_PGGAIN_2 /*!< In PGA mode, the inverting input is connected to VINM0 */
|
||
|
|
#define OPAMP_PGA_CONNECT_INVERTINGINPUT_IO0_BIAS OPAMP_CSR_PGGAIN_3 /*!< In PGA mode, the inverting input is connected to VINM0 or bias */
|
||
|
|
#define OPAMP_PGA_CONNECT_INVERTINGINPUT_IO0_IO1_BIAS (OPAMP_CSR_PGGAIN_2 | OPAMP_CSR_PGGAIN_3) /*!< In PGA mode, the inverting input is connected to VINM0 or bias , VINM1 connected for filtering */
|
||
|
|
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup OPAMP_PgaGain OPAMP Pga Gain
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
#define OPAMP_PGA_GAIN_2_OR_MINUS_1 ((uint32_t)0x00000000) /*!< PGA gain could be 2 or -1 */
|
||
|
|
#define OPAMP_PGA_GAIN_4_OR_MINUS_3 OPAMP_CSR_PGGAIN_0 /*!< PGA gain could be 4 or -3 */
|
||
|
|
#define OPAMP_PGA_GAIN_8_OR_MINUS_7 OPAMP_CSR_PGGAIN_1 /*!< PGA gain could be 8 or -7 */
|
||
|
|
#define OPAMP_PGA_GAIN_16_OR_MINUS_15 (OPAMP_CSR_PGGAIN_0 | OPAMP_CSR_PGGAIN_1) /*!< PGA gain could be 16 or -15 */
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup OPAMP_PowerMode OPAMP PowerMode
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#define OPAMP_POWERMODE_NORMAL ((uint32_t)0x00000000)
|
||
|
|
#define OPAMP_POWERMODE_HIGHSPEED OPAMP_CSR_OPAHSM
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
|
||
|
|
/** @defgroup OPAMP_VREF OPAMP VREF
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
#define OPAMP_VREF_3VDDA ((uint32_t)0x00000000) /*!< OPAMP Vref = 3.3% VDDA */
|
||
|
|
#define OPAMP_VREF_10VDDA OPAMP_CSR_CALSEL_0 /*!< OPAMP Vref = 10% VDDA */
|
||
|
|
#define OPAMP_VREF_50VDDA OPAMP_CSR_CALSEL_1 /*!< OPAMP Vref = 50% VDDA */
|
||
|
|
#define OPAMP_VREF_90VDDA OPAMP_CSR_CALSEL /*!< OPAMP Vref = 90% VDDA */
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup OPAMP_UserTrimming OPAMP User Trimming
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#define OPAMP_TRIMMING_FACTORY ((uint32_t)0x00000000) /*!< Factory trimming */
|
||
|
|
#define OPAMP_TRIMMING_USER OPAMP_CSR_USERTRIM /*!< User trimming */
|
||
|
|
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup OPAMP_FactoryTrimming OPAMP Factory Trimming
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#define OPAMP_FACTORYTRIMMING_DUMMY ((uint32_t)0xFFFFFFFF) /*!< Dummy value if trimming value could not be retrieved */
|
||
|
|
|
||
|
|
#define OPAMP_FACTORYTRIMMING_N ((uint32_t)0x00000000) /*!< Offset trimming N */
|
||
|
|
#define OPAMP_FACTORYTRIMMING_P ((uint32_t)0x00000001) /*!< Offset trimming P */
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* Private constants ---------------------------------------------------------*/
|
||
|
|
/** @defgroup OPAMP_Private_Constants OPAMP Private Constants
|
||
|
|
* @brief OPAMP Private constants and defines
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* NONINVERTING bit position in OTR & HSOTR */
|
||
|
|
#define OPAMP_INPUT_NONINVERTING ((uint32_t) 8) /*!< Non inverting input */
|
||
|
|
|
||
|
|
/* Offset trimming time: during calibration, minimum time needed between two */
|
||
|
|
/* steps to have 1 mV accuracy. */
|
||
|
|
/* Refer to datasheet, electrical characteristics: parameter tOFFTRIM Typ=2ms.*/
|
||
|
|
/* Unit: ms. */
|
||
|
|
#define OPAMP_TRIMMING_DELAY ((uint32_t) 2)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* Exported macros -----------------------------------------------------------*/
|
||
|
|
/** @defgroup OPAMP_Exported_Macros OPAMP Exported Macros
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @brief Reset OPAMP handle state.
|
||
|
|
* @param __HANDLE__: OPAMP handle.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define __HAL_OPAMP_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_OPAMP_STATE_RESET)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* Private macro -------------------------------------------------------------*/
|
||
|
|
|
||
|
|
/** @defgroup OPAMP_Private_Macros OPAMP Private Macros
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
#define IS_OPAMP_FUNCTIONAL_NORMALMODE(INPUT) (((INPUT) == OPAMP_STANDALONE_MODE) || \
|
||
|
|
((INPUT) == OPAMP_PGA_MODE) || \
|
||
|
|
((INPUT) == OPAMP_FOLLOWER_MODE))
|
||
|
|
|
||
|
|
#define IS_OPAMP_INVERTING_INPUT_STANDALONE(INPUT) (((INPUT) == OPAMP_INVERTINGINPUT_IO0) || \
|
||
|
|
((INPUT) == OPAMP_INVERTINGINPUT_IO1))
|
||
|
|
|
||
|
|
|
||
|
|
#define IS_OPAMP_NONINVERTING_INPUT(INPUT) (((INPUT) == OPAMP_NONINVERTINGINPUT_IO0) || \
|
||
|
|
((INPUT) == OPAMP_NONINVERTINGINPUT_DAC_CH))
|
||
|
|
|
||
|
|
#define IS_OPAMP_PGACONNECT(CONNECT) (((CONNECT) == OPAMP_PGA_CONNECT_INVERTINGINPUT_NO) || \
|
||
|
|
((CONNECT) == OPAMP_PGA_CONNECT_INVERTINGINPUT_IO0) || \
|
||
|
|
((CONNECT) == OPAMP_PGA_CONNECT_INVERTINGINPUT_IO0_BIAS) || \
|
||
|
|
((CONNECT) == OPAMP_PGA_CONNECT_INVERTINGINPUT_IO0_IO1_BIAS))
|
||
|
|
|
||
|
|
#define IS_OPAMP_PGA_GAIN(GAIN) (((GAIN) == OPAMP_PGA_GAIN_2_OR_MINUS_1) || \
|
||
|
|
((GAIN) == OPAMP_PGA_GAIN_4_OR_MINUS_3) || \
|
||
|
|
((GAIN) == OPAMP_PGA_GAIN_8_OR_MINUS_7) || \
|
||
|
|
((GAIN) == OPAMP_PGA_GAIN_16_OR_MINUS_15))
|
||
|
|
|
||
|
|
|
||
|
|
#define IS_OPAMP_VREF(VREF) (((VREF) == OPAMP_VREF_3VDDA) || \
|
||
|
|
((VREF) == OPAMP_VREF_10VDDA) || \
|
||
|
|
((VREF) == OPAMP_VREF_50VDDA) || \
|
||
|
|
((VREF) == OPAMP_VREF_90VDDA))
|
||
|
|
|
||
|
|
#define IS_OPAMP_POWERMODE(TRIMMING) (((TRIMMING) == OPAMP_POWERMODE_NORMAL) || \
|
||
|
|
((TRIMMING) == OPAMP_POWERMODE_HIGHSPEED) )
|
||
|
|
|
||
|
|
|
||
|
|
#define IS_OPAMP_TRIMMING(TRIMMING) (((TRIMMING) == OPAMP_TRIMMING_FACTORY) || \
|
||
|
|
((TRIMMING) == OPAMP_TRIMMING_USER))
|
||
|
|
|
||
|
|
|
||
|
|
#define IS_OPAMP_TRIMMINGVALUE(TRIMMINGVALUE) ((TRIMMINGVALUE) <= 0x1F)
|
||
|
|
|
||
|
|
#define IS_OPAMP_FACTORYTRIMMING(TRIMMING) (((TRIMMING) == OPAMP_FACTORYTRIMMING_N) || \
|
||
|
|
((TRIMMING) == OPAMP_FACTORYTRIMMING_P))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* Include OPAMP HAL Extended module */
|
||
|
|
#include "stm32h7xx_hal_opamp_ex.h"
|
||
|
|
|
||
|
|
/* Exported functions --------------------------------------------------------*/
|
||
|
|
/** @addtogroup OPAMP_Exported_Functions
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @addtogroup OPAMP_Exported_Functions_Group1
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
/* Initialization/de-initialization functions **********************************/
|
||
|
|
HAL_StatusTypeDef HAL_OPAMP_Init(OPAMP_HandleTypeDef *hopamp);
|
||
|
|
HAL_StatusTypeDef HAL_OPAMP_DeInit (OPAMP_HandleTypeDef *hopamp);
|
||
|
|
void HAL_OPAMP_MspInit(OPAMP_HandleTypeDef *hopamp);
|
||
|
|
void HAL_OPAMP_MspDeInit(OPAMP_HandleTypeDef *hopamp);
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @addtogroup OPAMP_Exported_Functions_Group2
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* I/O operation functions *****************************************************/
|
||
|
|
HAL_StatusTypeDef HAL_OPAMP_Start(OPAMP_HandleTypeDef *hopamp);
|
||
|
|
HAL_StatusTypeDef HAL_OPAMP_Stop(OPAMP_HandleTypeDef *hopamp);
|
||
|
|
HAL_StatusTypeDef HAL_OPAMP_SelfCalibrate(OPAMP_HandleTypeDef *hopamp);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @addtogroup OPAMP_Exported_Functions_Group3
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* Peripheral Control functions ************************************************/
|
||
|
|
HAL_StatusTypeDef HAL_OPAMP_Lock(OPAMP_HandleTypeDef *hopamp);
|
||
|
|
HAL_OPAMP_TrimmingValueTypeDef HAL_OPAMP_GetTrimOffset (OPAMP_HandleTypeDef *hopamp, uint32_t trimmingoffset);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @addtogroup OPAMP_Exported_Functions_Group4
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* Peripheral State functions **************************************************/
|
||
|
|
HAL_OPAMP_StateTypeDef HAL_OPAMP_GetState(OPAMP_HandleTypeDef *hopamp);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
#ifdef __cplusplus
|
||
|
|
}
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#endif /* __STM32H7xx_HAL_OPAMP_H */
|
||
|
|
|
||
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|